To access APIIDA API Gateway Manager, open your browser and point it to the IP address or hostname of the system you installed it on. On first start, APIIDA API Gateway Manager will start a First Run Wizard that will guide you through the setup process:

Step 1: Set up an Administrative User

In this step, you are required to create the initial administrative user. Make sure you remember the username and password, as you need it to log in to APIIDA API Gateway Manager. There must always be at least one local admin user. More can be created later.

Open

Provide the following information

• Your Display Name

  • Mandatory field

  • A display name for this user

• Your E-Mail (username)

  • Mandatory field

  • E-Mail address to reset a lost password and the username for this user

• Password and Please repeat

  • Mandatory fields

  • Password for this user

Click Next

Step 2: Select an Authentication Method

You can choose between the internal user management, Microsoft ActiveDirectory (LDAP) or SAML 2.0 authentication. Select Internal user management if you do not want to set up LDAP or SAML for now. You can also do this later. Even if LDAP or SAML is set up, local users can still log in. Take a look at the user overview later to see which users there are and which origin they have.

Open

Select Internal User Management

Click Next

Step 3: Configure your SMTP Server

To send emails, APIIDA API Gateway Manager needs to be able to connect to an SMTP server. If your SMTP server does not require authentication leave the user and password fields empty. This is needed to be able to send password reset emails. However, you can skip this step and configure it later.

• Sender E-Mail Address

  • Mandatory field

  • Email account of correspondent SMTP connection. This email address will be set as sender address by APIIDA API Gateway Manager

• Server

  • Mandatory field

  • SMTP server address as hostname or IP-address

• Port

  • Mandatory field

  • Port of SMTP server, mostly used

• Encryption

  • Mandatory field

• User

  • Username for authentication

• Password

  • Password for authentication

• Recipient of Test Mail

  • If you want to test your configuration, insert an existing target email address for test purposes

• Button: Test Configuration

  • Test your configuration. APIIDA API Gateway Manager will send a testmail to the defined email-address in the filed "Recipient of Test Mail”

Click Next (or click Skip if you want to configure your SMTP connection later)

Step 4: Register your first Layer7 API Gateway node

In this step, you can connect APIIDA API Gateway Manager to one of your Broadcom Layer7 API Gateways. Restman needs to be deployed to the gateway. Make sure, you provide APIIDA API Gateway Manager with the correct port and username and password needed to call Restman. If your gateway is not ready yet, feel free to skip this step. You can always add additional nodes later.

Provide the following information

Click Next to start the gateway registration process

Upon successful completion of the registration process, you will see the following message.

Step 5: Set up your Monitoring default alarm thresholds

To get meaningful data right from the start, this step allows you to set some simple default response time thresholds. You can configure more sophisticated defaults later.

Click Next

Done!

Congratulations, you finished the First Run Wizard and are ready to manage and monitor your Layer7 API Gateways. Clicking on Next, automatically logs you in and redirects you to a preconfigured dashboard.

The installation of the Gateway Manager is complete!